CARE & MAINTENANCE
For the best results, we recommend bringing LG Outdoor products indoors where possible or using a protective 'breathable' cover throughout the winter months.
It is NOT advisable to cover natural products (Wood, Rope, Ceramic furniture, etc.) with a non-breathable, fully waterproof plastic cover, as these covers can retain moisture under them, causing a build-up of mould or mildew.
To maintain the original appearance as long as possible, never use abrasive, acidic or caustic cleaning materials on any part of your LG Outdoor product. We recommend cleaning all surfaces with mild soapy water and a soft cloth to remove dust and dirt. Always rinse with fresh, clean water.
Spillages that are acidic or caustic in nature (i.e. fizzy drinks, red wine, sauces, vinegar etc.) should be cleaned immediately by blotting with a soft, absorbent cloth until dry. Do not wipe or spread the spillage.
To avoid accidental scratches to the surface of your table, use suitable table mats and coasters under any tableware (i.e. dishes, plates, glasses etc.).
Before winter storage of your furniture, ensure that any moisture collected in frames tubes has been drained out. When not in use outdoors, it is advisable if you cannot bring your product inside, then use a protective 'breathable' cover to protect from sunlight, wind, rain, frost, tree sap, bird droppings, dust etc.
Care for your Cushions
It is best to bring cushions indoors when it is raining to preserve the look of the fabric. Cushion covers are removable for machine washing up to 40°C to keep them looking fresh and new.
Eden season-proof cushions are not suitable for machine washing and are spot clean only.
Keeping your Weave Looking Brand New
LG Outdoor’s Weave is made exclusively in Vietnam, where weave has been created for hundreds of years.
The non-toxic PE (Polyethylene) weave has been designed to resist saltwater, chlorine, rain and UV light. As a result, this weave is very easy to clean and to keep looking new. Simply use warm soapy water to clean your weave, and use a small brush (i.e. a toothbrush) to get between those harder-to-reach woven areas.
LG Outdoor’s Weave can be recycled at the end of your product’s lifespan, making it safe and environmentally friendly.
Keeping your Rope Looking Brand New
LG Outdoor’s Rope Weave is made exclusively in Vietnam.
The marine-grade, double braided spun polyester rope has been designed to resist saltwater, chlorine, rain and UV light. As a result, this rope is very easy to clean and to keep looking new. Simply use mild soapy water to clean your weave, and allow it to dry naturally. For those harder-to-reach areas, use a small brush (i.e. a toothbrush) to clean.
When storing Rope furniture for an extended period, we recommend cleaning first and then allowing it to dry before being covered by an LG Outdoor breathable furniture cover or stored in a well-ventilated shed where possible.
Caring for your Hanoi Wood
LG Outdoor’s Hanoi Wood products are made from either FSC® Brushed Acacia or Eucalyptus Wood and are crafted to have an authentic distressed finish. The timber used is FSC® certified, ensuring that materials used are from well-managed forests in Vietnam. Due to the organic nature of the wood, the finish will change over time as it ages. A natural colour change will occur, as with all timbers, due to ageing and seasoning. Surface cracks may appear over time but do not have any influence on the structural integrity of the furniture.
As with any wood product, good care is essential to extend the life of your furniture. It is important that you remove any spills or deposits that could stain the furniture as soon as possible. Make sure you never use any abrasive substances, pads or brushes as they will reduce the finish’s resistance to dirt and could degrade the surface’s finish.
Before leaving the factory, all LG Outdoor’s Wooden furniture is given a light UV oil coating for added protection. This prevents moisture from penetrating the surface, protecting from staining (such as tea and red wine). Re-treat the surface of your furniture with a similar protective coating twice a year (and additionally if required) to ensure the maximum longevity of your product.
STEP 1: To clean, remove all dirt using warm, mild soapy water – allow to dry
STEP 2: Using a clean, dry cloth, apply a thin coating of 'UV Protection Oil' (this can be purchased from any hardware store)
STEP 3: Leave to dry for a minimum of 8 hours before use
*Repeat steps 1 to 3 as and when required
N.B. DO NOT use Teak Oil to protect or use a pressure washer to clean any outdoor wood, including Hanoi Wood.
When storing Wooden furniture for an extended period, we recommend cleaning first and then allowing it to dry before being covered by an LG Outdoor breathable furniture cover or stored in a well-ventilated shed where possible.
Caring for your Cast Aluminium
The Cast Aluminium used for LG Outdoor is an anti-rust material, so it can be left outdoors all year round and has been powder-coated to give an added layer of protection from wear and tear and scratching. To clean powder-coated frames, wash down regularly with mild soapy water and rinse thoroughly. Hose regularly with fresh water to remove airborne contaminants. Regular use of a mild wax polish will help maintain the showroom finish.
LG Outdoor’s Metal Frames have been designed to offer long-lasting durability in outdoor conditions. The metal frames go through a superior 3-step protective process known as EDP (Electro Deposited Primer). This process ensures the highest level of protection is applied so your product will last years to come.
How the EDP process works:
STEP 1: The metal is acid dipped to remove any traces of rust and to help adhere the primer to the metal, plus protects against corrosion
STEP 2: The metal frames and the primer are electrically charged, the frames a positive charge, the primer a negative charge. This automatic process works by the two attracting to each other to get a thick, even coverage.
STEP 3: Once the powder coating has been heated to over 200 degrees Celsius, it is applied to the metal evenly to give the finished colour and final layer of protection
After some months outdoors, and in particular damp/cooler conditions, regular garden mildew may build up on your product. This is normal and is easily cleaned off. Simply use warm soapy water to clean your Metal Frames.
Before leaving the factory, all of LG Outdoor’s Ceramic tables are given a water-resistant coating for added protection. This prevents moisture from penetrating the tiles, protecting from staining (such as tea and red wine) as well as frost (down to -10â°C). Retreat the surface of your Ceramic table with a similar protective coating twice a year to ensure the maximum longevity of your product.
After some months outdoors, and in particular damp/cooler conditions, regular garden mildew may build up on your product. This is normal and is easily cleaned off. Simply use warm soapy water to clean your Ceramic furniture.
To clean LG Outdoor’s Textilene, wash with mild soapy water and rinse thoroughly with fresh water. Allow to dry naturally. After some months outdoors, and in particular damp/cooler conditions, regular garden mildew may build up on your product. This is normal and is easily cleaned off. Simply use warm soapy water to clean your Textilene.
Care for your Parasol
- Parasol should always be used with a suitable weighted parasol base
- Do not use in windy conditions
- Never leave parasol up whilst unattended
- Please keep canopy away from sources of extreme heat and naked flame
- Warm soapy water is recommended to clean the product
- To keep your product looking its best, we should always recommend covering with an LG Outdoor Furniture Cover when not being used for longer periods.
- Throughout the winter months either bring indoors or cover as above. Failure to do so may invalidate your warranty
BBQ Care & Maintenance
Cleaning the Cooking Surfaces
After EVERY cooking session, ensure any dried fat/food deposits are cleared off all grills. Use a barbecue cleaning brush, which has been specifically designed to quickly and effectively clean the grills, and allow to cool before washing in a warm soapy solution. Rinse off with fresh, clean water and dry before returning to barbecue. Coat all of the cooking surfaces lightly with cooking oil to prevent corrosion of cast iron surfaces.
Cleaning the Flame Tamers
Periodically wash with warm soapy water, and dry thoroughly before reinstalling into the barbecue body.
Cleaning the BBQ Body
Regularly clean the body of the barbecue, dependant on the use and type of food cooked, with warm soapy water.
Cleaning the Drip Tray/Fat Collection Cup
It is very important you clean the drip tray, fat channel and fat collector on a regular basis because if this is ignored, a build-up of fats and greases may cause a fire in the barbecue. Please check the level of waste fat in the fat collection cup regularly whilst cooking to ensure it does not overflow. Please dispose of fat waste responsibly.
Cleaning the Burners
Ensure that all burner ports are free from obstruction. Remove the burners and clean by washing in hot water and detergent. Rinse in fresh, clean water, dry and return to the barbecue. Light burners immediately to prevent rust and corrosion. If the barbecue has not been in use for an extended period of time, brush lightly with cooking oil.
First Use after Long Periods
Check all gas valve orifices, burner tubes and connections for obstructions, and check that all burners are in their correct position. Check to see if the gas cylinder is full and check for gas leaks using the soapy solution. Set burner controls to ‘off’ and connect gas supply, ensuring all grills and hotplates are clean before use.
Grills are very heavy so take extra care when moving, cleaning etc.
Make sure you clean grills and empty the fat responsibly after each use for continued optimum performance.
When cooking on the barbecue, ensure that it is placed on a solid, level surface.